George Mason University Power Output Discussion

I needed someone who have this software and this components to help me to do this assignment.

Software needed: MPLAB X IDE from Microchip

Components needed: 1- Curiosity HPC Development Board Part Number: DM164136 . & 2- 2 microcontrollers PIC18f45 K 50 (PIC18F45K50-I/P 40 PDIP)

Instruction for the assignment :

Produce an output from a 110 VAC device

An example of this could be turning off/on a 110 VAC bulb

YOU NEED TO USE A POWER ELECTRONICS SOLUTION (i.e. the one recommended in the parts list).

The assignment must include: A pdf file describing:

  • Problem description
  • Pseudocode
  • Assembly code (Comments please)
  • Wiring diagram
  • System’s Picture and short video (use your smartphone)

MATH245 Victoria University Ordinary Differential Equations Project 1

Problem. Your
job is to move a mass suspended on a pendulum from one point in space to
another in as short a time as you can, with the least oscillations you can.

Objectives:

  1. Solution of the differential equation via Laplace transforms
  2. Analysis of different solutions with different forcing functions that achieve the goal.
  3. Plot some trajectories using MATLAB, Mathematica, Excel, or ???
  4. Written description and explanation of your work.

Organization. Your paper should be organized as follows.

  1. Introduction.Provide a succinct statement of the problem.
  2. Solution analysis.How did you perform the computations/experiments/etc that led to the answer?
  3. Results. Here you will experiment with some forcing functions to what the oscillation amplitudes look like and how long it takes the crane to move the mass.We should see some graphs here.
  4. Discussion.How do you interpret your results? What else might be done?
  5. Literature Cited.If you use any references, please list them here.If no references were needed, you may omit this section.

National Society of Professional Engineers

Read the National Society of Professional Engineers: Code of Ethics for Engineers and the

following ethics case study. Based on the code of ethics and your own independent

analysis and consideration, answer the following questions:

a. Which, if any, of the elements of the code of ethics were or may have been violated by

the scenario’s principal actors? State each of those rules of practice or professional

obligation by number and summary content, and indicate how it applies to the situation

at hand.

b. What actions should have been taken? Again, state the elements (by number and

summary content) of the code of ethics that command or suggest to take those actions.

Occupational Safety and Health: Introduction to Advanced Risk Management

  • 1P1: Introduction to Advanced Risk Management

    Welcome, to OSHT 2337: Advanced Risk Management.During this course we will be focused on exploring ISO Standards to include ISO 45001, ISO 31000, and ISO 19000. Throughout the course we will strive to answer the following questions:

    • What steps do we take to interpret and apply the safety management systems in a business, government, or other workplace organization?
    • How do we draft a plan based on one or more of these systems?
    • Why do I need to apply these systems?
    • How do I harmonize a safety management system with operations, and continue to function?

    The field of occupational safety and health (OSH) has become a topic of increasing importance throughout many industries. The establishment of the Occupational Safety and Health Administration (OSHA) in 1970 reflected the recognition that safety in the workplace is a basic expectation for all employees. Originally addressing concerns in industry and hazards associated with mechanical injury, the field of occupational health and safety has expanded across workplace environments, from the office to the airplane, as well as to the laboratory and the vivarium.First, take a moment to introduce yourself to the class – your professional background, your reason for coming to the field of safety, and a safety moment that convinced you that safety should take precedence in the workplace.I look forward to this semester with you all!

  • Item

    What is a Management System?

    Attached Files:

    Safety programs and safety management systems are often confused terminology.A safety management system is described as the set of procedures an organization needs to follow in order to meet its objectives. It is the framework of policies, systems, processes, and procedures used to ensure that an organization can fulfill all tasks required to achieve its defined business objectives.A safety program is primarily reactive, and has separate components that “work” independent of the others. The management system would take the pieces of the safety program and integrate them into the system which will allow an organization to follow Deming’s Plan-Do-Check-Act model.Elements of an Effective Safety Program – OSHA

  • Assignment

    1A1: KWHL – Advanced Risk Management

    Attached Files:

    Use the attached chart to help you gather information and think through the objectives for this class. Fill in the blanks below with NOTES, questions, and ideas, rather than complete sentences. You may use these notes later to write your report or presentation. Use this sheet to help you think on paper.
    Topic: Advanced Risk Management
    What do I know and what do I hope to learn about Advanced Risk Management? During this course we will be focused on an exploration of safety management systems such as ANSI Z10 Occupational Health and Safety Management Systems, OSHAS 18001, 18001:2007 Occupational Health & Safety Management System Requirements; 18002:2008 Occupational Health and Safety Management System Guidelines for Implementation: ISO 13000 Risk Management Standards as ANSI Z69-1:2011 Vocabulary for Risk Management Principles and Guidelines, Z690-3:2011 Risk Assessment Techniques; FAA Safety Management Systems.Utilizing the KWHL Chart, answer your level of understanding about the each of the questions posed below in theKnow column, and what you want to know in the Want column, and finally in the How column indicate where you think you find this information out (hint: its not your textbook):

    • Interpret and apply the safety management systems in a business, government, or other workplace organization.
    • Draft a plan based on one or more of these systems.
    • Explain the applicability of these systems.
    • Illustrate how to harmonize safety management systems with the operational purposes and functions of the enterprise.

    NOTE: You will be utilizing this chart throughout the course as you cover the different modules. This will help you see where you think you are, and where you are going throughout the course. This chart will also be beneficial as you complete your final review of course assignment during week 5.)

  • Item

    ISO 45001 Occupational health and safety

    Over 7 600 people die each day from work-related accidents or diseases – that’s over 2.78 million every year*.The burden of occupational injuries and diseases is significant, both for employers and the wider economy, resulting in losses from early retirements, staff absence and rising insurance premiums.To combat the problem, ISO has developed a new standard, ISO 45001, Occupational health and safety management systems – Requirements, that will help organizations reduce this burden by providing a framework to improve employee safety, reduce workplace risks and create better, safer working conditions, all over the world.The standard was developed by a committee of occupational health and safety experts, and follows other generic management system approaches such as ISO 14001 and ISO 9001. It will take into account other International Standards in this area such as OHSAS 18001, the International Labour Organization’s ILO-OSH Guidelines, various national standards and the ILO’s international labour standards and conventions.source: International Labour Organisation – https://www.iso.org/iso-45001-occupational-health-…

    • Assignment

      1A2: 3-2-1 Management System Research

      Research management systems, start by reading this web page to get an idea of a few of the management systems out there. Once you get an idea of what management systems are out there for a company to use, research a few of them and gather the following information:3 – things that will benefit a company if they use a management system.2 – things that you feel will be a hurdle for an established company to start using a management system1 – a question you still have about management systems.Compile your information in a Word Document, between 250 and 500 words. Citations and references are not required. Spelling and grammar do count!

    Nairobi Spreading of Tracer Dispersion Model and Segregated Flow Model

    Models are useful for representing flow in real vessels, for scale up, and for diagnosing poor flow. These models apply to turbulent flow in pipes, laminar flow in very long tubes, flow in packed beds etc. An ideal pulse of tracer is introduced into a reactor and the pulse spreads as it passes through the vessel, and to characterize the spreading according to various models. Illustrate the spreading of tracer using dispersion model and segregated flow model with suitable diagram.

    Note:

    The answer will be

    • paraphrase
    • minimum 1000 words for Dispersion model With suitable diagram
    • minimum 1000 words for segregated flow model With suitable diagram
    • Harvard Referencing
    • Provide some figures/pictures with reference

    Please refer the attached books which you can use for answer the questions.

    University of The Cumberlands Back Up And Restoration Process Paper

    Task – 1

    Develop a procedure guide to ensure that a computer adheres to a standard security baseline and has no known vulnerabilities.

    For each application, fill in details for the following general steps:

    Acquire and install the application.

    Scan computers.

    Review scan results.

    Identify issues you need to address.

    Document the steps to address each issue.

    Task – 2

    Create a procedure guide that describes the necessary steps for recovering a desktop workstation computer. Fill in details for each of the following steps:

    Describe the processes of:

    Fixing the problem that caused the failure in the first place. Keep the description of this process general. Just address the problem and ensure the recovery process starts with a functional computer.

    Restoring the newly repaired computer to a base workstation.

    Restoring local data for the specific workstation that failed.

    Provide the steps to follow for each of the restore operations. Assume you will be using the Windows Backup and Restore utility.

    University of Kentucky Smart City and Systems Using Data Analysis Paper

    Given below are some of the research topics. Please pick up a topic for this research paper in an area that you are competent and comfortable with.

    • Sensor technology for smart human-care services by applying Big Data techniques
    • Implementation of Deep learning techniques for Sensor Technology in IoT
    • IoT systems analysis, modeling, and simulation using Big Data
    • IoT technologies and applications in eHealth using Data Mining
    • Data and knowledge mining for smart human-care services through sensors
    • IoT solutions for well-being and active aging using Data Mining techniques
    • Energy-efficient IoT Big Data acquisition techniques
    • Privacy and security related to IoT and Big Data
    • IoT and Big Data analytics on energy-constrained platforms
    • Optimization, control, and automation of sensor-based IoT applications using Data Mining
    • IoT and Big Data programming model
    • Architecture and protocols for IoT and Big Data
    • Emerging sensor-based, hardware architectures for IoT and Big Data
    • Smart cities and systems using Big Data
    • IoT Big Data storage and processing techniques
    • Fault-tolerant and redundant systems for IoT by applying Data Mining
    • IoT based on various types of sensors.

    https://www.frontiersin.org/research-topics/12857/…

    RUBRICS – Research Paper

    1. Ph.D. quality submissions

    2. Your ideas & your own words

    3. Provide all the citations

    Total points = 20

    Research Paper: 2-3 pages + cover page + citations

    APA and Capstone Format 5.0 pts

    Current APA formats should be followed.

    Topic 5.0 pts

    There should be one clear, well-focused on the topic..

    Quality of Information 5.0 pts

    References are primarily peer reviewed professional journals or other approved sources. The reader is confident that the information and ideas can be trusted.

    Support of Ideas/Critical Analysis 2.5 pts

    E excellent, appropriate conclusions.

    Conclusions 2.5 pts

    The conclusion(s) reached were correct and supported research.

    The Volkswagen Diesel Emission Fraud Case Assignment 3

    Identify your case:

    Engineering Ethics Spring 2019 Assignment 3

    You can chose between Case 2, Case, 3, the Volkswagen Diesel Emission Fraud Case, engineering aspects of the Flint, Michigan contaminated water supply debacle. For your case, you are to prepare a response and submit It.

    Your response should use 1.5-line spacing and be a maximum of 7 pages, although you are encouraged to keep your response to between 5 and 7 pages in total.

    Assigned Tasks or Questions to be addressed:

    1. Provide a brief summary of the sequence of relevant actions/events (a bullet-point summary in your written response is acceptable if appropriate). Suggested length: 2 pages or less.

    2. What was or were the ethical dilemmas or ethical violations that were inherent in this case. If there were more than two, please identify the two that you find most critical or egregious. Suggested length: less than one page.

    3. Using the “Utilitarian Model,” the “Respect for Person’s Model,” and the “NSPE Code of Ethics,” reflect on what each of these would help resolve the ethical dilemma or which may have been violated in any ethical violation. Suggested length: 2 pages

    4. If you had been an engineer involved in this case (working for the company or companies facing the dilemma), what could you have done to help resolve the ethical dilemma, avoid the ethical violation, or report the ethical violation (pick one approach). Suggested length: less than 1 page.

    Academy of Computer Education Emerging Threats and Countermeasures Paper

    We live in a world where an Internet crime occurs every minute in some cases cybercriminals steal millions of dollars with near impunity. For every 1 that is captured nearly 10,000 or not captured. For every 1 sucessful prosecuted in a court of law, 100 get off without punishment or with a warning.

    Q1) Why is it difficult to prosecute cybercriminals?

    Requirements

    • APA Format 7th edition
    • Should be a minimum of 350 words. (excluding coverpage, conclusion and references)
    • No plagiarism
    • Include In-text citations
    • TB attached for references – (ISC)² CISSP Certified Information Systems Security Professional Official Study Guide

    West Virginia University Short TED Talk Video Summary

    Appropriate TED Talk videos can be found through https://www.ted.com/talks or on YouTube. It is recommended that you consider important skills you would like to better develop that are critical to success in college and engineering. This includes, but is not limited to, time management and organization, teamwork, failure, leadership, ethics, communication, and more. Students are expected to watch five (5) videos and write a 200 word summary on each. These summaries are due throughout the semester (see deadlines below).

    _____________________

    Just select 1 video and write the 200 summary about it, make sure it’s related to engineering

    And please don’t write about ( how a driverless car sees the road), ( stunning building made from raw) and, (how germs travel on Planes), and (The beautiful future of solar power) because i already wrote about them